Integrated monitoring and remote control system BMS (Building Management System) for ICSTM building installations. Assures HVAC control (1x cold water Chiller, 2x hot water Boilers and 4 hydraulic distribution circuits, 3 Air Handling Units, 35 fan coils) and lighting installation for laboratories and hallways. Monitors: the fire alarm system, burglar alarm, access control system, dangerous gases emissions, laboratories energy consumption, perimeter drainage network. It’s comprised of 8 automation controllers PLC (Honeywell CLEA2026B21) and over 40 combined IO modules CLIOP831A and CLIOP824A. The system encompasses sensors for temperature, pressure, air quality, noise, dangerous gases emissions (CO, Acetylene, Hydrogen). The system integrates ModBus communication with the thermal power plant, Chiller, AHU’s, alarm systems for fire and burglary, ambient thermostats and electricity meters.

DC Enterprise infrastructure fully redundant N+1 (Tier 2). Comprised of 16U blade servers Enclosure (HP C7000), with installed 2 servers (HP Blade System Proliant BL460Gen9 – 2x Xeon 2.6GHz 32 logical processors, 64 GB RAM) and 2 workstation blade (HP Blade System Proliant WS460Gen9 – 2x Xeon 2.6GHz 32 logical processors, 64 GB RAM, Nvidia Grid K2 – 2x Kepler GPU 1536 cores per GPU, 8 GB GDDR5). Fast Storage array HP 3Par cu 24 TB RAW storage, 4x FCOE 8Gbps + 4x FO 10 Gbps and one NAS server 32 TB RAW storage, 4x Eth 1Gbps. NOC infrastructure enterprise grade comprised of: router (HP MSR3024 AC Router), Next Generation Firewall (HP S3020F NGFW Appliance), 2x switch TOR (HP 5900AF-48XG-4QSFP+), wireless controller + 9 AP (HP 830 8g POE+ AP HP MSM460) The ICSTM Cloud is based on the upper mentioned hardware configuration and uses: 2 servers configured in Failover Cluster for networking services and a second Cluster which integrates 2 workstation servers for the Virtual Desktop Infrastructure VDI based on the Xen Desktop solution.

Complete line of portable devices for measurements of individual components and entire PV generators. Comprised of HT-instruments: 1 – SOLAR I-Ve 1500V Multifunction I-V Curve Tracer; 2 – SOLAR300N Power Quality Analyzer for checking the efficiency of photovoltaic systems plus MPP300 Accessory for measuring and recording the efficiency of a single- and three-phase, single- and multi-string photovoltaic system; 3 – PVCHECKs Multifunction device for checking electric safety and performance of a photovoltaic system; 4 – HT7051 Professional insulation meter with programmable test voltage up to 5KV; 5 – MACROTEST G1 Multifunction earth tester for measuring earth resistance, continuity of protective conductors.

Simultaneously measure size-segregated mass fraction concentrations corresponding to PM1 , PM2.5 , Respirable, PM10 and Total PM size fractions • STEL alarm setpoint • Automatic zeroing (with optional zero module) minimizes the effect of zero drift • Perform in-line gravimetric analysis for custom reference calibrations • Manual and programmable data logging functions • Aerosol concentration range 0.001 to 150 mg/m 3 • Environmental protected and tamper-proof with Environmental Enclosure • Heated Inlet Sample Conditioner to reduce humidity effects

Handheld 3016: 0.3 – 25 μm 0.1 CFM (2.83 LPM) Flow Rate View 6 Particle Sizes Simultaneously Designed for ISO 21501-4 Compliance: Unit-to-Unit Accuracy and Repeatability Bright 3.5” (8.89 cm) Color Touch Screen Display Removable / Rechargeable Li-Ion Battery Large Memory for Storing Data (3,000 samples) Concentration Limit – 4,000,000/ft3 Temperature/Relative Humidity Probe Included Alphanumeric Location Labels Test Wizard for Cleanroom Pass/Fail Reports: FS-209E, ISO-14644-1 or EU GMP Annex 1 50-record Configurable Recipe Database Easily Confi gurable Interface with Zoom Capability Internal Audible Alarm Open Architecture Connectivity with OPC Server.

The Flexible Assembly Line has been designed to enable the application and testing of a broad range of manufacturing strategies such as pallet transport systems, warehouse stations, assembly stations and testing stations, all interconnected with various industrial communication networks (Profibus, IO-Link, Profinet etc.).

Atomic absorption spectrometer, with flame (FAAS) and graphite furnace (GFAAS) techniques, computer-controlled, equipped with 6 lamps turret. Available hollow cathode lamps for Pb, Ca, Mg, Cr, Fe, Zn, Na, Al, K, Ti, Ni, Cu, Ge, Se, Sr, Y, Zr, Ag, Cd, Mn, Au. Automatic alignment optimized Czerny-Turner monochromator, wavelength and slit automatic selection wavelength range: 185 – 900 nm; slit automatic selection: 0.2; 0.5; 0.8, 1.2 nm; source: hollow cathode lamps (of the metal to be determined), HCL, SHCL, D2HCL; detector – photomultiplier UV sensitive, extended spectral range; background correction for flame and graphite furnace techniques – high-frequency Deuterium lamp (300Hz); compensation up to 3 Abs, enhanced signal-noise ratio; Zeeman background correction for graphite furnace technique – bipolar magnetic field, transverse, 2-field and 3-field correction mode. Display: Absorbance (-0,01 up to 3,00), Concentration (units selection: mg/l, µg/l, others, with 5 digits (0,001 to 99999); Calibration curve up to 30 standards (linear, non-linear).

This instrument using the microwave field and pressure to digest various samples (organic and inorganic matrixes) for further analysis in liquid solutions. Suitable for samples derived from areas such as agriculture, nutrition, animal feed, environment, geochemistry, petrochemistry, metallurgy, human biology, and pharmacy, etc. Compact stainless-steel oven with a capacity of 27 liters; the interior temperature of the sample vessels (8 pcs) is determined with a contact-free IR thermometer, thus absolutely contamination-free temperature determination being insured; closeable rotors with collecting vessel ensures top-level safety and long service life; simple retrofitting of an evaporation/concentration unit because of integrated suction feature; the integrated control enables the system to be operated after charging with samples.