Electrochemical system for determination of water traces in various samples (range of water content in samples from 1 ppm to 5%). Compact equipment with coulometric cell without diaphragm, titration vessel, platinum electrode, automatic system for draining / solvent manager (ISO 10337 or equivalent compatible); sample weight (liquid or solid): 10 µg – 200 mg; color displayed (selectable measurement unit); method creation and saving, through existing software; resolution H2O: 0.1 µg. Samples from the domains: petroleum industry, cosmetics, pharmaceuticals, food industry, etc.

Equipment for moisture determination of solid samples through differential weighing. The equipment consists of a balance and a halogen heating unit. The system provides fast heating and precise temperature control, shorter heating-cooling cycles can also be performed; sample weight is shown on the digital display color (selectable measure unit); correction factors can be used, through software setting; measurement range (resolution): weight 2 – 150 g (1 mg), temperature: 40°C – 230°C (1°C); moisture content – resolution 0,01% (sample weight min. 10 g), respectively 0,05 % (sample weight min. 2 g).

Digital precision electrochemical meter for: pH (0…14); conductivity (0.00 µS/cm … 2000 mS/cm); dissolved oxygen measurements (0.00 … 19.99 mg/l ). 3 dedicated electrodes and selectable resolution (0.001/0.01/0.1). Functions: calibration procedures (max. 5 points); automatic stability control; automatic sensor recognition; selectable measurement units; automatic temperature compensation; continuous measurement control.

Fat extractor through Soxhlet method, with 6 places. Working temperature 90-240°C. Solvent volume up to 50 mL. Extraction time 0-99 min. Water consumption 2 L/min. 600 W.

Thermostating unit using water or silicon oil. Equipment with 12 liter volume, stainless steel interior, with 4 places. Temperature range: ambient + 5oC – 1100C, with ±0.1°C resolution, and 10C temperature stability.

It is designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor-controlled technology within the speed range of 0/4 – 530 rpm (two-speed ranges). The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters.

Freeze Dryer @ – 55 °C, including vacuum pump (≤ 10 Pa). Equipment useful for sample preservation via pre-freezeing and water sublimation under vacuum. Water capture capability: 3 kg / 24 hours Drying cabinet with sample disposal in 4 trays (200 x 20 mm) or in 8 bottles. Drying time: 24 h Electronic control of temperature, with USB disk interface for data storage.

Digital laboratory analytical balance with internal calibration, and 3 doors. Capacity: max. 210 g Rezolution: ± 0.1 mg.

Stainless steel equipment for cleaning via ultrasounds suitable for complex geometry, such as fins, undercuts, boreholes etc. Capacity: 4.2 liters Frequency: 45 kHz Temperature: ambiental+5 … 80 °C (accuracy 2°C) Time: 1 … 99min. (resolution 1 min.)

– precise and fast laboratory drying oven – chamber volume 111 litres – temperature range from 10°C above ambient to 250/300°C – forced air circulation system in the chamber guarantees homogeneous temperature distribution in all the processes of drying, heating and sterilization of materials in laboratories – high operation comfort, precise temperature control and short chamber temperature equalization times after the door opening – higher speed and accuracy of all the tempering procedures ensures economical operation, especially suitable for high humidity materials, for demanding and accurate tests and processes – wide selection of optional equipment and accessories – output for connecting a printer or PC – possibility of validation (IQ, OQ).